HVAC Installation

The answer is the technology of indoor and environmental comfort, it stands for HVAC ( heating, ventilation, and air conditioning ) that make up the HVAC system equipment. In modern buildings the design, installation, and control systems of these functions are integrated into one or more HVAC systems making hvac repair for service experts . For larger buildings, building services designers and engineers, such as mechanical, or building services engineers analyze, design, and specify the HVAC system, and specialty mechanical companies fabricate and commission them. Building permits and code-compliance inspections of the HVAC installations are normally required for all sizes of buildings and you always want HVAC Installation contractors with a A+ rating with the BBB. Commercial HVAC is important in the design of medium to large industrial and office buildings such as skyscrapers and in marine environments such as aquariums, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors. Residential HVAC for very small buildings, contractors normally design and select HVAC systems and equipment.  

You can count on Elite HVAC Installation Contractors helping you solve all your HVAC installation estimates and advice.

Heating Installation

There are many different types of heater installs. Central heating is often used in cool climates to heat houses and public buildings. Such a system contains a Heating system ( boiler, furnace, or heat pump to warm water, steam or air ) in a central location such as a furnace room in a home or a mechanical room in a large building. The use of water as the heat transfer medium is known as water hydronic heating. These systems also contain either duct work for forced air systems or piping to distribute a heated fluid to radiators to transfer this heat to the air. The term radiator in this context is misleading since most heat transfer from the heat exchanger is by convection, not radiation. The radiators may be mounted on walls or installed within the floor to give floor heat. Newer generation heating and cooling systems are ductless heating and cooling and geothermal heating.

You can count on Elite HVAC Contractors helping you solve all your heating installation estimates and advice.

Heater Installation

A heater is an appliance that generates heat or causes another body to achieve a higher temperature. In a household or domestic setting, heaters are usually appliances whose purpose is to generate heating and hot water. Other types of heater installations are tankless water heater, combi boiler, condensing boiler, infrared heater and furnaces reviews. There are 3 types of heat transfer: convection, conduction and radiation. There are many Heater Brands and they each have different high efficiency heater ratings. They all use different fuel source such as gas heater, propane heater, electric heater, oil heater, geothermal and heat pump. The most important thing to do is have the heater maintained yearly by a HVAC contractor.

You can count on Elite HVAC Contractors helping you solve all your heater installation estimates and advice.

Furnace Installation

Furnace installation is a install of a warm air heat systems distribute heated air through duct work systems of supply and return air through metal or fiberglass ducts. Many Furnace prices vary based on if heater is a gas furnace, oil furnace, propane furnace or electric furnace. Systems use the same ducts to distribute air cooled by an evaporator coil for air conditioning. The air supply is typically filtered through a furnace filter or air cleaners to remove dust and pollen particles. You will need a furnace repair for all types of fuels there is a gas furnace, propane furnace, electric furnace and oil furnaces, gas is the most reliable. Most major reviews are Goodman Furnace, Lennox Furnace, Nordyne furnace, Rheem furnace, ducane furnace, Carrier furnace, American Standard Furnace and Luxaire Furnace.

You can count on Elite HVAC Contractors helping you solve all your furnace installations estimates and advice.

Boiler Installation

Boiler installation is the install of hot water boiler heating systems with a circulator, which is a pump, to move hot water through the distribution system. This distribution system can be via radiators, convectors (baseboard), hot water coils (hydro-air) or other heat exchangers. The heated water can also supply an auxiliary heat exchanger to supply hot water for bathing and washing. When the central boiler that is is installed does both heat and domestic hot water together it is referred to as a summer and winter boiler, combi boiler or double boiler by some. The high efficiency boilers are a condensing boiler that has efficiencies above 90%. Combi boiler prices vary by size, fuel type  and brand. You will find some of the top brands are Triangle Tube boilers, Vaillant and Weil McLain boilers. You can purchase a unit to heat with gas, propane, and oil or need a boiler service when you have no heat.

You can count on Elite HVAC Contractors helping you solve all your boiler installation estimates and advice.

Air Conditioning Installation

Air conditioner and air conditioning units are used for the removal of heat. Heat can be removed through radiation, convection, or conduction. Refrigeration conduction media such as water, air, ice, and chemicals are referred to as refrigerants. A refrigerant like Freon or better new age 134A is employed either in a heat pump system, VRV, ductless air conditioning system or even ducted air conditioning units in which a compressor is used to drive the system. New A/C systems can have very high efficiency and are sometimes combined with seasonal thermal energy storage for air conditioning installations. Air conditioning installations are needed when you have high er humidity and temperature than you like. An air conditioning system, or a standalone air conditioner, provides cooling, ventilation, and humidity control for all or part of a building. The most reliable ac system by Consumer Reports since 1992 is American Standard, Mitsubishi and Carrier. The most important part of a air conditioning installation is not the brand, it is the quality and procedures the hvac contractor follows during the ac install.

You can count on Elite HVAC Contractors helping you solve all your air conditioning installation and advice.

Air Conditioner Installation

Air Conditioner Installation is a Central air conditioner systems with a both an outdoor condenser and evaporator unit that are often ducted. AC installation systems installed in modern homes, offices, and public buildings, but are a challenge to install in a building that was not designed to receive it because of the larger air ducts required.

An alternative to central systems is the use of separate indoor and outdoor coils in ductless air conditioning or mini split systems that one of our air conditioning contractors can help you with contact us today. These systems still need air conditioning service, although most often seen in residential applications, are gaining popularity in small commercial buildings. The evaporator coil is connected to a remote condenser unit using refrigerant piping between an indoor and outdoor air conditioner unit instead of ducting air directly from the outdoor unit. Indoor units with directional vents mount onto walls, suspended from ceilings, or fit into the ceiling. Other indoor units mount inside the ceiling cavity, so that short lengths of duct handle air from the indoor unit to vents or diffusers around the rooms.

You can count on Elite HVAC Contractors helping you solve all your  air conditioner installation estimates and advice.

Cooling Installation

An air conditioning system, or a standalone air conditioner, provides cooling, ventilation, and humidity control for all or part of a building after a cooling installation. Lean more under air conditioner and air conditioning tabs.

You can count on Elite HVAC Contractors helping you solve all your cooling installation estimates and advice.

Heat Pump Installation

Heat Pump Installation, you can have central heat pumps and ductless heat pumps as well as geothermal heat pumps installed. The heat pump can extract heat from the exterior air (air source) or from the ground (ground source). Initially, heat pump HVAC systems were used in moderate climates, but with improvements in low temperature operation and reduced loads due to more efficient homes, they are increasing in popularity in colder climates. Heat pumps can be air to air, air to water, water to air and water to water systems.

You can count on Elite HVAC Contractors helping you solve all your heat pump installation estimates and advice.

Geothermal Installation

A geothermal heat pump or ground source heating and cooling is a central heating and/or cooling system that transfers heat to or from the ground.

Your new geothermal installation by Elite HVAC Contractors uses the earth as a heat source (in the winter) or a heat sink (in the summer). Our geothermal energy pros design takes advantage of the moderate temperatures in the ground to boost efficiency and reduce the operational costs of heating and cooling systems, and may be combined with solar heating to form a geosolar system with even greater efficiency than just geothermal energy.

Ground source heat pumps are also known as “geothermal heating” although, strictly, the heat does not come primarily from the center of the Earth, but from the Sun. Geothermal energy facts, they are also known by other names including geoexchange, earth-coupled, earth energy systems. The engineering and scientific communities prefer the terms “geoexchange” or “ground source heat pumps” to avoid confusion with traditional geothermal power, which uses a high temperature heat source to generate electricity.

Geothermal heating and cooling systems reach fairly high Coefficient of performance (CoP), 3 to 6, on the coldest of winter nights, compared to 1.75-2.5 for air-source heat pumps on cool days.[6] Ground source heat pumps (GSHPs) are among the most energy efficient technologies for providing geothermal HVAC.

Geothermal heat pump cost are higher than for conventional systems, but the difference is usually returned in energy savings in 3 to 10 years, and even shorter lengths of time with federal, state and utility tax credits and incentives. Geothermal heat pump systems installed are reasonably warranted by manufacturers, and their working life is estimated at 25 years for inside components and 50+ years for the ground loop.[9] As of 2004, there are over a million geothermal system installed worldwide and growing fast.

You can count on Elite HVAC Contractors helping you solve all your geothermal heat pump estimate and advice.

Air Cleaner Installation

The use of furnaces, space heaters and boilers as means of indoor heating may result in air pollution with incomplete combustion and the emission of carbon monoxide, nitrogen oxides, formaldehyde, volatile organic compounds, and other combustion byproducts. Incomplete combustion occurs when there is insufficient oxygen; the inputs are fuels containing various contaminants and the outputs are harmful byproducts, most dangerously carbon monoxide which is a tasteless and odorless gas with serious adverse health effects. Many property owners will install a air purifier or air scrubber for improved health.

Natural ventilation, only to an air cleaner installation is a key factor in reducing the spread of airborne illnesses such as tuberculosis, the common cold, influenza and meningitis. Opening doors, windows, and using ceiling fans are all ways to maximize natural ventilation and reduce the risk of airborne contagion. Natural ventilation requires little maintenance and is inexpensive along with humidifiers and air cleaners. Many owners will  select to have a humidifier and air cleaner installed on their HVAC air quality system.

The primary health concerns associated with indoor air quality is carbon monoxide exposure are its cardiovascular and neurobehavioral effects. Carbon monoxide can cause atherosclerosis; the hardening of arteries, and can also trigger heart attacks. Neurologically, carbon monoxide exposure reduces hand to eye coordination, vigilance, and continuous performance. It can also affect time discrimination. It is always good to have your home air quality tested. 

You can count on Elite HVAC Contractors helping you solve all your indoor air quality with an air cleaner installation estimate and advice.

Thermostat Installation

A thermostat is a component of a control system which senses the temperature of a system so that the system’s temperature is maintained near a desired setpoint. The number one name is Honeywell thermostats followed by White Rodgers thermostat. A thermostat may be a control unit for a heating or cooling system or a component part of a heater or air conditioner. Thermostats can be constructed in many ways and may use a variety of sensors to measure the temperature. The output of the sensor then controls the heating or cooling apparatus.

Most digital thermostats in common residential use in North America and Europe are programmable thermostats, which will typically provide a 30% energy savings if left with their default programs; adjustments to these defaults may increase or reduce energy savings.

The newest surge in sales in thermostat installations is the wireless thermostats that are WIFI thermostats and can be controlled from remote locations with the use of electronic devices as smart phones, tablets and computers by smart thermostat. They vary greatly in price due to many options and capabilities. Including the Nest thermostat reviewed by many after  Google investing in it heavily.

You can count on Elite HVAC Contractors helping you solve all your thermostat installation needs, prices and advice.